Tilta Tilta Advanced Kit For Bmpcc 6K Pro- Black | Shoulder Rigs, Cages & Baseplates

Arm Your Camera With The Tiltaing Camera Cage For The Blackmagic Pocket Cinema Camera 6K Pro And 6K G2. This Kit For The Bmpcc6K Pro/G2 Provides A Protective Case For The Camera Body And Includes The Appropriate Accessories To Improve Functionality. The Full Cage Offers Multiple 1/4″-20 Threads With Locating Pins, Cold Shoe Mounts, A Nato Rail For Type Iv And Vi Side Handles As Well As Rod Attachment Ports For Our Single Rod Holders. It Is Also Equipped With Arri-Compatible Rosettes That Have Been Specially Developed For Our Adjustable Top Handle Plus To Enable More Flexible Operation And Handling.

Expanded Tilta Advanced Kit For Bmpcc 6K Pro- Black Key Features:

The Right Arm Module Can Be Removed To Convert The Full Cage Into A Half Cage. This Provides Greater Flexibility In Situations Where A Lighter Design Is Required, Such As: B. When Using A Gimbal.

The Base Plate Provides Multiple ¼”-20 Mounting Points For Attaching Your Camera To Various Quick Release Plates And Is Compatible With The Arca Receiver On The Rs2 Mounting Plate. Using The Half Cage, The Base Plate Can Be Expanded To Carry The Black Magic Design Battery Grip.

A 15Mm Rod Mount Can Be Installed To Secure 15Mm Rods In Front Of The Camera Body When Using The Battery Grip In A Half Cage Setup. When The Battery Grip Is Not In Use, The Included Quick Release Plate Can Be Used To Connect The Camera Cage To The Included 15Mm Lws Baseplate Type Vi. The 15Mm Lws Base Plate Adds A 15Mm Rod Mount To The System And Allows You To Mount Accessories With Rods, Such As: B. Matte Boxes And Follow Focus Systems. The Bottom Of This Base Plate Connects To Our Standard Tilta Dovetails And Also Supports Various Quick Release Plates With 1/4″-20 And 3/8″-16 Threads. An Advanced Power Handle Attaches To The Left Side Of The Cage Via A Nato Rail Connection.

The Handle Features A 12V Micro Dc Port (3.5/1.35Mm) And An 8V Usb-C Port For Powering Your Camera Body Or Other Accessories Like Our Nucleus Nano Wireless Lens Control System. The Handle Can Also Control The Run-Stop Of The Bmpcc 6K Pro/G2 Using The Included Run-Stop Cable. The Rotation Of The Handle And The Additional Hand Strap Enable Comfortable And Flexible Operation Of Your Camera System For Handheld Recordings. A Quick Release Top Handle Can Be Attached To The Top Of The Cage Via A Cold Shoe Mount And Additionally Secured With A 1/4″-20 Screw. This Creates An Extremely Secure Connection That Allows You To Comfortably Handle Your Camera When Shooting From Low Angles.

The Top Handle Features Additional 1/4″-20 Threads, Cold Shoe Mounts And A Horizontal 15Mm Pole Mount For Attaching External Monitors Or Evfs. A Ssd Drive Bracket Attaches Directly To The Cage With A 1/4″-20 Screw And A Locating Pin. It Can Then Be Clipped To An M.2 Ssd Drive To Attach It To Your Camera And Allow You To Save Footage To A Separate Ssd Card. The Included Usb-C Cable Can Then Be Screwed Into The Ssd Holder And The Sidewall Of The Cage Near The Usb-C Port. This Creates An Extremely Secure Connection Between Your Camera And The Drive. The 90-Degree Hdmi Adapter Attaches To The Cage Near The Camera’S Hdmi Port, Providing A Secure Connection That Doesn’T Place As Much Strain On The Port Itself.

What’S In The Box?

• Full Camera Cage For Bmpcc 6K Pro
• Tiltaing Quick Release Handle
• Tiltaing Ssd Drive Bracket For T5
• Tiltaing Left Side Advanced Power Handle With Run/Stop (F570 Battery)
• Tiltaing Advanced Left Side Handle Attachment Type Vi *1
• Advanced Side Handle Run/Stop Cable For Usb-C Port (Rs-Ta3-Usbc)
• Hdmi 90 Degree Adapter For Bmpcc 4K/6K（Ta-T01-Hda-90）*1
• 90-Degree Usb-C Cable (30Cm) For Bmpcc 4K/6K（Cb-Usbc-30）
• X2 Aluminum Rod 15*200Mm Black
• X2 Aluminum Rod 15*100Mm Black