Hague Hague Ph200 Pro Pan + Tilt Camera Powerhead | Sliders, Dollies & Jibs

The Hague Ph200 Pro Remote Pan And Tilt Power Head Can Be Mounted To A Tripod, Jib, Crane, Or Wall Bracket. It Can Be Mounted Vertically Or Underslung And It Supports Up To 5 Kg, Making It Ideal For Most Professional Handheld Camcorders And Dslr Cameras.

Hague Pro Remote Pan And Tilt Power Head For Cameras

The Head Will Pan And Tilt Through 360° Enabling The Camera To Point Directly Upwards Or Downwards When Required. It Is Driven By 2 Custom-Geared Motors With A Belt Drive. The Power Head’S Drive Pulleys Have Sealed Radial Ball Bearings For Effortless Smooth Movement With Minimum Backlash. The Motor Drive Can Be Easily Disengaged To Enable The Camera To Be Balanced Correctly On The Camera Plate.

The Head’S Camera Plate Is Adjustable For Different Sizes Of Camera And Will Support Up To 5 Kg. The Speed Of Movement Is Variable, From The Slowest Crawl Up To 52° Per Second. The Drive Motors Are Quiet At Low Speeds, But Will Be Heard At Higher Speeds If The Camera’S On-Board Microphone Is Used (Similar To Most Power Heads On The Market).

The Head Can Be Mounted To A Tripod, Jib Or Wall Bracket. It Has 5 Mounting Holes, 2 X 6 Mm Threaded Holes, 1 X Standard ¼” Threaded Hole, 1 X 3/8″ Threaded Hole, And 1 X 10 Mm Hole. A 10 Mm Mounting Bolt Is Also Supplied.

Joystick Control Box
The Joystick Control Gives The Head Precision Pan And Tilt Movement In Either Direction, From A Slow Crawl Up To The Required Speed. The Joystick Will Also Pan And Tilt Simultaneously. On The Side Of The Control Box Is A Variable Speed Controller So You Can Set The Maximum Speed For Better Control. There Are Also Switches To Change The Direction Of The Joystick Control As Well As An On/Off Switch.

On The Front Of The Control Box Are Sockets For The Control Cable, 12 V Dc In, Plus A Composite Video Out Phono Socket, This Enables A Monitor To Be Added To Monitor Your Shots. Led Lights Indicate When The Unit Is Switched On And When The Internal Battery Is On Charge. The Head Is Powered By A Rechargeable Internal Battery Or Can Be Powered From A Supplied Mains Adaptor.

On The Bottom Of The Control Box Are 4 Non-Slip Feet To Prevent It Moving When It Is Used On A Table, And There Is Also A ¼” Threaded Hole In The Base To Allow It To Be Mounted To A Tripod Or Any Other Mount That Has A Standard ¼” Mounting Screw. An Optional Mounting Bracket Is Also Available To Attach It To The Hague Range Of Jibs And Cranes.

Control Cable
A 5 M Cable Is Supplied To Connect The Control Box To The Head. This Cable Can Also Carry A Composite Signal From The Head To The Controller, Allowing A Monitor To Be Used Without The Need For Additional Wires. An Optional 5 M Extension Cable Is Also Available Should You Need To Have The Control Box Further Away From The Head.

Quality Design And Construction
Manufactured By Hague In The Uk From Precision Cnc-Machined Aluminium Parts, With Control Components Designed And Supplied By Keene Electronics.

Specifications

• Pan And Tilt Head
• Weight: 2.4 Kg
• Dimensions (L X W X H): 240 X 120 X 450 Mm
• Head Sockets: 1 X 6 Pin Control Socket, 1 X Rca Phono Socket (Video In)
• Head Construction: Black Powder-Coated Cnc-Machined Aluminium
• Drive: 2 X Custom-Geared Motors With Belt-Driven Drive Pulleys
• Maximum Camera Weight: 5 Kg
• Approximate Maximum-Sized Camera (L X W X H): 450 X 180 X 280 Mm
• Control Box
• Weight: 1 Kg
• Dimensions (L X W X H): 140 X 100 X 75 Mm
• Control Box Sockets: 1 X 6 Pin Control Socket, 1 X Rca Phono Socket (Video Out), 1 X 12 V Dc In Socket, Size 2.1 Mm
• Switches: On/Off, Pan Direction, Tilt Direction, And Maximum Speed Control
• Approximate Speed: Variable From 0-52° Per Second
• Power Requirements: 12-15 V Dc
• Control Box Construction: Black Powder-Coated Aluminium With Non-Slip Feet And ¼” Threaded Mounting Hole
• Mains Adapter: 100-240 V Ac To 15 V Dc
• Control Cable: Length 5 M