Hague Hague K10 Camcrane Camera Jib With Stand + Powerhead | Sliders, Dollies & Jibs

Quick And Simple To Setup, The Hague K10 Camcrane Camera Jib Is Suitable For All Cameras Under 2.5Kg And Comes Supplied With A Stand And A Remote Controlled, Motorised Pan And Tilt 360&Deg Powerhead. Once Balanced (Standard Bar Weights Not Included), The Camera Can Smoothly Move From Ground Level To Almost 4M High And The Crane Will Pan 360&Deg On The Stand. You Can Also Pan And Tilt The Camera On The End Of The Crane By Using The Wired Remote Control.

Hague K10 Camcrane Camera Jib With Stand + Powerhead

Camcrane Camera Jib

Once Balanced The Camera Can Smoothly Move From Ground Level To Almost 4 Metres High And The Crane Will Pan 360 Degrees On The Stand. You Can Also Pan And Tilt The Camera On The End Of The Crane By Using The Wired Remote Control.
The Distance From The Stand To The Camera Is 2.5 Metres And It Has A Total Length Of 3.6 Metres. It Is Ideal For All Handheld Cameras Under 2.5Kg. An Optional Monitor Bracket Is Available, This Enables A Lcd Monitor To Be Fastened To The Crane, Making It Easier To Monitor Your Shots.

Pan & Tilt 360° Powerhead

The Electronic Motorized Pan & Tilt Power Head Is Fastened To The End Of The Camcrane Camera Platform By A 1/4″ Screw.The Unit Is Battery Operated With A Wired Remote Control For Both Pan & Tilt, It Also Has A Variable Speed Control. It Will Pan 340 Degrees And Tilt Up Or Down 15 Degrees. The K10 Is Supplied With A Tilt Correction Plate Which Will Allow The Camera To Tilt Down 30 Degrees From A Level Position, Which Is Useful When The Crane Is Being Used For High Shots.

• Pan Speed Is Variable Between 4 To 8 Degrees Per Second
• Tilt Is Variable Between 1.2 To 2.4 Degrees Per Second (Speeds Are Approximate)
• Powered By 4 Aa Batteries
• Size 145X115X103Mm (5.75X4.5X4 Inches)

Hague Jrs Jib Rigging Stand

The Hague Jrs Jib Rigging Stand Is Designed To Support The Jib Arm Whilst Setting Up The Camera End Of The Crane. It Is Ideal When Setting Up Our Larger Cranes Such As The K8, K9, K10, K12, Or K18. With The Jib Arm Support It Makes It Much Easier To Get The Camera Or Powerhead And Camera Combination Attached To The Crane And Levelled Off. The Stand’S Height Is Adjustable From 1.1 To 1.4 Metres High. Standard Bar Weights (Not Supplied) Are Used For Counterbalance, These Are Held In Place By The Weight Bar And There Is An Adjustable Fine Trim Weight To Obtain Perfect Balance.